Thursday, March 8, 2012

HDD Crash = Pause in posts.

My HDD crashed many weeks back,and its still not back from the Seagate guys,which is why things have stagnated around here.

Hope it comes soon.Expect posts on:
1.SD Card Interfacing with PSoC3/5.
2.Some breakouts I made for specific devices(4Wire Touch,MicroSD and some TI Temperature sensors)
3.New,and easy to home etch PCB layout for the QuickPSoC3. Here.

4.SD Card based bootloader for PSoC3/5.(Read the program from an SD card connected on power-on,then burn & run it.)
5.FreeRTOS on PSoC5,and then maybe port Contiki too?.
6.NXP LPC 1114 Exploration and tutorial series.
7.SPI,I2C for the 89V51RD2.Maybe a 1Wire library too?
8.Python/MATLAB Script for writing to SPI EEPROMs.
9.Interfacing the CYRF6936 based wireless modules with any MCU/embedded target,i.e hardware independent drivers.
10.Wireless Bootloader?
11.An algo for dynamic Node Realization and Intercommunication in decentralized Wireless systems..
12.Generic USB HID based datalogger,PSoC3 powered.
13. A webserver development board,based on the ENC28J60 and the PSoC3


Thats the rough plan of posts and projects after I get my harddisk back.

2 comments:

  1. Hello Blogger I Would like to Invite You to Join Blog 'N' Like- Blogger Social Community Submit Your Blog and Get More Hits
    Join Blog 'N' Like

    ReplyDelete
  2. Hi Kartik,

    Try to implement standard FAT32 library for the SD card interface. This will make it more universal.

    ReplyDelete